Search the Community

I'm looking to buy a OutWest Officials chest protector harness in new condition. PM if you have one and are willing to sell it. Thanks in advance.

Does anyone have any Wilson mask harnesses they don't want? I know they aren't that popular but I like them and need some for back-up masks.

Hey guys, I ordered a Force3 Defender mask from UA about a month ago and I am enjoying it thoroughly! I have started to look into ordering replacement pads and a Wilson harness for the mask, but I realized I do not know what version of the mask (V1 or V2) that UA sent to me. I noticed on the Force3 website that replacement pads are only sold for the V1 as far as I can tell, but I do not know which version I have. Is there any way to distinguish between the two different versions of the mask? Looking at pictures, the masks seem almost identical.

While cleaning up some old gear for our league, I came across a bunch of old masks. Not the best, but they work. But most of them had the old plastic belt harness. So In order to make them usable again, I discovered that Honig's is selling their Red harness for $1. Yes, it's red, but it's a dollar. So if you are a league looking to make some gear usable, this might not be a bad alternative. Probably not the look everyone is looking for, but it's a much better harness than what we had.

Howdy all ... Looking for a harness AND/OR pads with the following logo. Any leads (aside form eBay) would be appreciated. Like this:

It seems my modifications to the Schutt XV chest protector have popularized a trend, and inspired several others to join in. I now have 4 CP's here that I'll be making a variety of modifications to so as to extend and improve their usefulness. Schutt XV – This will be using a ULFH from @Razzer (which I've taken to nicknaming RayFlex or, in this case StingRay) in the 3-strap variant. Instead of utilizing the existing yoke – as we did with @D62 blue http://umpire-empire.com/index.php?/topic/65283-ump-life-delta-flex-style-harness/&do=findComment&comment=303927 – I got my hands on a few of these yoke-point parts, and we'll be using one of them instead. Douglas WestVest – This will be using either a DeltaFlex or a Force3 NRH. The wearer has a slim body frame, so I might go with a DeltaFlex, but the NRH might be the better route with its longer straps and less cost. This has also been cleaned (needed it), received new hardware (black T-hooks, nylon buckles and tri-glides instead of corroded metal), and some rivets are being replaced with aluminum Chicago screws. Honig's K-1 CP – A new harness will be a massive improvement, and will be getting one of the three Flex-style harnesses, depending on cost, of course. It will also see its shoulder plates bent and shaped to arch much truer and more conforming. The primary task will be determine a means of fastening the straps to the harness; the current method uses not much more than velcro and is annoying and ineffective. Schutt AiR Flex I – Instead of using the TPU-EVA foam bricks the XV relies on, the AiR Flex uses Brock Beads (which I'll explain during my rebuild of the unit). This aside, the two are are nearly the same, using virtually the same parts. I would truthfully take an XV into any level of baseball, but the thinner AiR Flex might give me pause at the adult-level stuff. That's not to say that it's still not a viable CP, as I've witnessed umpires do adult-level ball with softshells and Davishields. On the AiR Flex, we'll be cutting away the yoke and employing a 4-strap Flex harness once again. I'll also be repositioning the ailettes from "on top" the shoulder – where they bely their football pad origins – down to somewhere more forward. If I had my druthers, I would actually try to put together a closet/garage service on refitting CP pads ala what Team Wendy's offered. I'll update this thread as work progresses!

Just received the harness to replace the original on my Platinum CP. Mere words aren't enough. This. Harness. Is. Beyond. AWESOME. An added feature is that it has been personalized, which is icing on the cake ! Woo hoo ! Thanks @Razzer for the fantastic work, and thanks also to @MadMax for the referral !

With this last order of nine harnesses arriving on my doorstep this morning, fresh from @Razzer in Maple Syrup-land, this makes 20 harnesses I've commissioned from him in the past year. Sure, there've been one or two Schutts that these have gone on, and the occasional Force3 UnEqual, or Douglas, or Champro / Champion, even. Out of the 20, can you guess where 14 have gone? Yup, freakin' Wilson CPs. 11 Platinums and 3 Golds. Oh sure, you can easily (and lazily) point out, "But Max, that just indicates that Wilson CPs are more popular and numerous!", but it also indicates just how plain awful and ineffective the Wilson units are with their stock harnesses. Each umpire supplied with a Flex -style harness (preferably Ray's) experiences a dramatic improvement in fit and protection. Many suddenly become very aware of how brief the coverage is on the Platinum, especially, as it doesn't provide much in the way of abdomen protection, nor does it natively allow an extension to be added... ... but that's another discussion, for another time.

Up for sale is a BRAND NEW (never cut) Nike Harness. Can ship tomorrow if purchased by end of day today. $25 OBO Thanks!

for sale, as a set, brand new never used Rawlings two tone mask pads and harness. $35 shipped PPFF. Any questions send me a PM.

Any Reebok fan(atic)s out there? Show your brand loyalty on your mask with a set of black Reebok memory foam & microfiber pads and a black Reebok harness. . I'm asking $30 shipped.

Hi all ... Looking for an All-Star harness.... either new, or slightly used .......thanks .......

ump-attire is out of stock, called all-star they are out of stock and not expecting any until end of november. I have one on my gold but thinking about getting an unequal also and would like a delta flex harness on every chest protector I use. How can they be on backorder that long

Now that I've got three masks, I figure I may as well get rid of my old one and someone can get some use out of it. Still in great condition with only the occasional scuff on the frame itself. Asking $20 plus shipping, payable via PayPal. Pics are huge, so here's an imgur album instead: http://imgur.com/a/iwnYY

I searched and couldn't find anything about it, but would the delta flex harness work with a Champion P210? I love the cp, just not the harness that comes on it and I was wondering if a delta flex would fit it.