Register or Sign In to remove these ads

blue32

Members
  • Content count

    509
  • Joined

  • Last visited

  • Days Won

    5

blue32 last won the day on August 15

blue32 had the most liked content!

Community Reputation

162 Neutral

About blue32

  1. All I kept thinking while watching that video was: "Those light blue pads actually look pretty damn good in that black mask."
  2. That's a good price. Just wanted to give you a heads up, if anyone gets this done, I was given 2 options-a semi gloss finish, or a high gloss finish. I went with the semi gloss. It gave it more of a matte finish, which is what I preferred. I didn't want it super glossy. Also, if you want to get adventurous, you can do the CF in different colors also.
  3. Just curious how you are going to encase it in whatever fabric you are going to use? Looking at the pads on my Wilsons, it seems like the nylon is bonded to the foam. I was thinking that maybe a spray adhesive would be best to bond the fabric to it?
  4. Thanks man! None yet. I would imagine actual CF would be pretty expensive, no?
  5. Yeah I should have done a little better job on my homework, but that's what I heard all through school! Oh well, I just finished a tourney that I made a ton of cash at, so it doesn't hurt too much. I just found another place locally that looks like it would be less expensive. Yeah, my lead time was 4 weeks, which I didn't mind, since I had a couple other masks I was able to use.
  6. Those were my thoughts, exactly. You can also get DIY kits as well, but I'm not crafty enough to trust that i would do a good job.
  7. From what I have read, it's very durable. It's used on rifle stocks quite a bit, with the most common complaint being that over time, the sling has a tendency to rub a wear mark. Time will tell, but it should be just fine.
  8. Check around, you might find a shop locally that would do it for a lot less than you'd think. I may have paid too much, but it wouldn't be the first time.
  9. Thanks guys. @MadMax-yes, there is a definitely a "quantity discount" so to speak. The place that did it has a $500 minimum, but they did it for less because it was added to a production run they were getting ready to do anyway. The mask itself is a Wilson Dyna Lite aluminum I picked up for $75, so with this finish, I have $175 into it. Based on what masks are going for these days, I think it's a pretty fair amount to have into a mask that is, for now, a one of a kind. Now my thoughts have turned to dipping the outer shell parts of one of my CP's to match. (Not the Riddell) Not sure if I would get the same $100 deal though. It would also be labor intensive, because if I want to do it right, I would have to drill out the rivets to disassemble the parts, and then reassemble it after. Maybe that could be an off-season project. Hmmmm...
  10. Inspired by all of the great ideas on this board, as well as that hideous American flag mask, I decided to try something unique. The funny thing is, while I waited for my mask to get done over the past several weeks, some of you all started sharing chest protectors that you vinyl wrapped with a carbon fiber print. I don't like to talk about something until I have it in hand. I guess I don't want to jinx it or something. So, I looked around locally for someone that could do this for me, and found a shop that did. For those that have never heard of it, it's a fairly recent method of coating a metal surface using film and actuator chemicals that forms a bond that is very durable. It's become very popular in the automotive (rims, engine parts, trim) as well as the firearms industry. My first thought was that I wanted to do a carbon fiber print. These guys did an amazing job. The pictures look pretty good, but they don't do it justice. It is an amazing looking mask, in my opinion. Anyway, I wanted to share it with you all, and see what you think. For those that are curious about the price, I'm sure it varies by the area you live, but I paid $100. I know, it was spendy, but I look at it as less than a doubleheader.
  11. Don't suck!
  12. He's also a career .244 in 12 years in this elite league, and a whopping .194 this season, so yeah, he's a trusted expert on balls and strikes as well.
  13. They are much stiffer than the wilson's and others out there.
  14. Hey Max, where would be a good place to get a quality piece of foam if one were to have one made? Also, What types do you recommend that is readily available for purchase, being that we can't hop on Amazon and order a sheet of zorbium?